| The DART Series Multifunction Instruments provide basic depth, speed, log and sea temperature, all in one space saving package. Additionally, the Model DDM600 will display battery voltage or heading data as provided by an NMEA 0183 compatible compass. An NMEA 0183 output allows the DDM600 to send the data for display by other intruments, such as the ChartLINK series of video navigators. Four lines of information are displayed simultaneously in large 5/8" tall numbers. |
The DDM600 has a depth range of 2.5 to 600 feet, while the D2330
has a range of 2.5 to 400 feet. The DDM600 comes with a flush
mount kit or can be hinge mounted from above or below. The D2330
is designed to be flush mounted in the dash.
Both the DDM600 and the D2330 have an
adjustable Keel Offset for reading depth below the keel or below
the surface of the water, a unique Signal Strength Indicator,
speed, average speed, and minimum and maximum alarms for depth
and sea temperature. Both instruments come standard with a ADX-100
depth transducer, designed to be epoxied inside fiberglass hulls,
and a ASTX-20NTH speed and temperature nylon thru hull sensor.
|
DART Multifunction
Series SPECIFICATIONS
| Power Requirements for DART Series instruments: 11-15 VDC. Backlit | |
| Depth: | 2.5' to 600', fathoms, meters equiv. (DDM600) 2.5' to 400', meters equiv. (D2330) Min. and Max. alarms. |
|---|---|
| Transducers: | ADX-100 in-hull depth; 200kHz. Depth Offset ±9.9' relative to transducer depth. ASTX-20NTH nylon thru-hull speed/temp. ![]() |
| Remote Alarm Output: | 12VDC; 50 mA current limited. |
| Temperature: | 28.0 to 96.0°F, -2.2 to 35.5°C. |
| Speed: | 0.0 to 50.0 knots (KPH or MPH equiv.) actual speed;
average speed. Maximum speed reading dependant on transducer model. |
| Trip Log: | 0 to 1999 nautical miles. |
| Timer: | 00:00 seconds to 19:59 hours and minutes. |
| Current Drain: | 0.3 amps day, 0.4 amps night. |
| Specifications
subject to change without notice or obligation. |
|